Figure 24-2 Menu 2.1Traffic Redirect Setup - ZyXEL Communications Prestige 652H series User Manual

FIELD
Recovery
Interval(sec)
ICMP Timeout
Traffic Redirect
Dial Backup
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
24.3.1 Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using Menu 2.1 — Traffic Redirect Setup.
Press Space Bar to Toggle.
Menu 2 WAN Backup Setup
Table 24-1 Menu 2 WAN Backup Setup
When the Prestige is using a lower priority connection (usually a WAN backup
connection), it periodically checks to whether or not it can use a higher priority
connection.
Type the number of seconds (30 recommended) for the Prestige to wait between
checks. Allow more time if your destination IP address handles lots of traffic.
Type the number of seconds for an ICMP session to wait for the ICMP response.
Press [SPACE BAR] to select Yes or No.
Select Yes and press [ENTER] to configure Menu 2.1 Traffic Redirect Setup.
Select No (default) if you do not want to configure this feature.
Press [SPACE BAR] to select Yes or No.
Select Yes and press [ENTER] to configure Menu 2.2 Dial Backup Setup.
Select No (default) if you do not want to configure this feature.
Menu 2.1 - Traffic Redirect Setup
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 15
Press ENTER to Confirm or ESC to Cancel:

Figure 24-2 Menu 2.1Traffic Redirect Setup

Prestige 652H/HW Series User's Guide
DESCRIPTION
24-3