Protocol Dependent Ethernet Setup; Tcp/Ip Ethernet Setup And Dhcp; Figure 25-2 Menu 3.1 Lan Port Filter Setup - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu to
define the filter sets.

25.2 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined below.
For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
For bridging Ethernet setup refer to the Bridging Setup chapter.

25.3 TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet Setup, as shown next
25-2
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:

Figure 25-2 Menu 3.1 LAN Port Filter Setup

:
Menu 3 LAN Setup