Snmp Traps; Table 35-2 Snmp Traps; Table 35-3 Ports And Permanent Virtual Circuits - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide

35.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events occurs:
TRAP #
1 coldStart (defined in RFC-1215)
2 warmStart (defined in RFC-1215)
3 linkDown (defined in RFC-1215)
4 linkUp (defined in RFC-1215)
5 authenticationFailure (defined in
RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)
6a For intentional reboot :
The port number is its interface index under the interface group.
35-4

Table 35-2 SNMP Traps

TRAP NAME

Table 35-3 Ports and Permanent Virtual Circuits

PORT PVC (PERMANENT VIRTUAL CIRCUIT)
1 Ethernet LAN
2 1
3 2
... ...
13 12
14 xDSL
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent with the port number when any of the links
are down. See the following table.
A trap is sent with the port number.
A trap is sent to the manager when receiving any SNMP
gets or sets requirements with wrong community
(password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
DESCRIPTION
SNMP Configuration