Prestige 652H/HW Series User's Guide
FIELD
Route Name
Type a name for the bridge static route for identification purposes.
Active
Indicates whether the static route is active (Yes) or not (No).
Ether Address
Type the MAC address of the destination computer that you want to bridge the
packets to.
IP Address
If available, type the IP address of the destination computer that you want to bridge
the packets to.
Gateway Node
Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
31-4
DESCRIPTION
Bridging Setup