Editing Login Script - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide
Table 24-7 Menu 11.3 Remote Node Network Layer Options
FIELD
My WAN Leave the field set to 0.0.0.0 to have the ISP or other remote router
Addr dynamically (automatically) assign your WAN IP address if you do not
know it. Enter your WAN IP address here if you know it (static).
This is the address assigned to your local Prestige, not the remote router.
NAT Press [SPACE BAR] and then [ENTER] to select either Full Feature,
None or SUA Only. See the Network Address Translation (NAT) chapter
for a full discussion on this feature.
Metric Enter a number from 1 to 15 to set this route's priority among the
Prestige's routes. The smaller the number, the higher priority the route
has.
Private This parameter determines if the Prestige will include the route to this
remote node in its RIP broadcasts. If set to Yes, this route is kept private
and not included in RIP broadcasts. If No, the route to this remote node
will be propagated to other hosts through RIP broadcasts.
RIP Press [SPACE BAR] and then [ENTER] to select the RIP direction from
Direction Both/ None/In Only/Out Only and None.
Version Press [SPACE BAR] and then [ENTER] to select the RIP version from
RIP-1/RIP-2B/RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used
to establish membership in a Multicast group. The Prestige supports both
IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [SPACE
BAR] to enable IP Multicasting or select None to disable it. See the LAN
Setup chapter for more information on this feature.
Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] at
the message "Press ENTER to Confirm..." to save your configuration and return to menu 11, or press [ESC]
at any time to cancel.

24.9 Editing Login Script

For some remote gateways, text login is required before PPP negotiation is started. The Prestige provides a
script facility for this purpose. The script has six programmable sets; each set is composed of an 'Expect'
string and a 'Send' string. After matching a message from the server to the 'Expect' field, the Prestige returns
the set's 'Send' string to the server.
For instance, a typical login sequence starts with the server printing a banner, a login prompt for you to enter
the user name and a password prompt to enter the password:
24-12
DESCRIPTION EXAMPLE
(DEFAULT)
Menu 2 WAN Backup Setup
0.0.0.0
(default)
None
(default)
15
(default)
NO
Both
(default)
RIP-1
None
(default)