Table of Contents
Advertisement
1.3.4 EIR (Excess Information Rate)
This is the burst capability of the connection, i.e., the maximum allowable data transfer rate. EIR must be
greater than or equal to the CIR.
Step 1.
Go to Menu 4 – Internet Access Setup, move the cursor to the Connection Type field, press the
[SPACEBAR] until it displays Leased-Sync and then press [ENTER]. Frame relay can only be
configured for leased synchronous connections.
Step 2.
Next, move the cursor to the Edit Frame Relay Options= field, press the [SPACEBAR] once to
display Yes and then press [ENTER]. This takes you to Menu 4.2 – Internet Setup Frame
Relay Options shown next.
Encapsulation= RFC 1490
DLCI = 16
CIR (kbps)= 64
EIR (kbps)= 80
Figure 8
User's Guide Supplement
Menu 4 - Internet Access Setup
ISP's Name= ISP
Connection Type= Leased-Sync
Leased Ports= 2
Pri Phone #= N/A
Sec Phone #= N/A
My Login= 1111
My Password= ********
Single User Account= No
IP Addr= N/A
Edit Frame Relay Options= Yes
Edit Script Options= N/A
Device Type= N/A
Nailed-Up Connection= N/A
Multilink= N/A
Idle Timeout= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 7
Menu 4 - Internet Access Setup
Menu 4.2 – Internet Setup Frame Relay Options
Enter here to CONFIRM or ESC to CANCEL:
Menu 4.2 – Internet Setup Frame Relay Options
Prestige 153X Supplement
7
Advertisement
Table of Contents
