Table of Contents
Advertisement
Prestige P645 ADSL Internet Access Router
2.7
Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the following table.
OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Enter information
Required fields
<
N/A fields
Save your
configuration
Exit the SMT
2-6
Table 2-2 Main Menu Commands
PRESS/<READ>
[ENTER]
To move forward to a sub-menu, type in the number of the
desired sub-menu and press [ENTER].
[ESC]
Press the [ESC] key to move back to the previous menu.
Press the [SPACE
Fields beginning with "Edit" lead to hidden menus and have a
BAR] to change
default setting of No. Press the [SPACE BAR] to change No to
No to Yes then
Yes, then press [ENTER] to go to a "hidden" menu.
press [ENTER].
[ENTER] or
Within a menu, press [ENTER] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
[Up]/[Down] arrow
the next field, respectively.
keys
Fill in, or Press the
You need to fill in two types of fields. The first requires you to
[SPACE BAR] to
type in the appropriate information. The second allows you to
select
cycle through the available choices by pressing the [SPACE
BAR].
?
> or ChangeMe All fields with the symbol <?> or ChangeMe must be filled in order
be able to save the new configuration.
<N/A>
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER]
Save your configuration by pressing [ENTER] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
Type 99, then
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
press [ENTER].
DESCRIPTION
Hardware Installation & Setup
Advertisement
Table of Contents
Troubleshooting
