Figure 5-6 Menu 11.3 For Vc-Based Multiplexing With Rfc 1483 And Enet Encap; Table 5-2 Tcp/Ip Remote Node Configuration - ZyXEL Communications Prestige 645R User Manual

Adsl router
Hide thumbs Also See for Prestige 645R:
Table of Contents

Advertisement

Prestige P645 ADSL Internet Access Router
IP Options:
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
IP Address Assignment = Dynamic
My WAN Addr= 0.0.0.0
Single User Account= No
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
VPI #= 0
VCI #= 35
Press Space Bar to Toggle.

Figure 5-6 Menu 11.3 for VC-based multiplexing with RFC 1483 and ENET ENCAP

FIELD
Rem IP Address
This will show the IP address you entered for this remote node in
the previous menu.
Rem IP Subnet
Enter the subnet mask for the remote network.
Mask
IP Address
Press the [SPACE BAR] to select Static for a fixed IP address
Assignment
given by an ISP or Dynamic for the IP address to be assigned
automatically by a server each time the remote node logs on.
My WAN Addr
Some implementations, especially the UNIX derivatives, require
the WAN link to have a separate IP network number from the
LAN and each end must have a unique address within the WAN
network number. If this is the case, enter the IP address
assigned to the WAN port of your Prestige.
Note that this is the address assigned to your local Prestige
WAN, not the remote router. If the remote router is a Prestige,
then this entry determines the local Prestige Rem IP Address in
menu 11.1 (see Table 5-1).
Single User
Use the [SPACE BAR] to select either Yes or No. Set this field to
Account
Yes to enable the Single User Account feature for your Prestige.
See the section on Internet access for more information on the
5-6
Menu 11.3 - Remote Node Network Layer Options
Enter here to Confirm

Table 5-2 TCP/IP Remote Node Configuration

DESCRIPTION
IPX Options :
Rem LAN Net #= N/A
My WAN Net #= N/A
Hop Count= N/A
Tick Count= N/A
W/D Spoofing(min)= N/A
SAP/RIP Timeout(min)=N/A
Dial-On-Query= N/A
VPI #= N/A
VCI #= N/A
Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)= N/A
VPI #= N/A
VCI #= N/A
Or ESC to Cancel:
Remote Node TCP/IP Configuration
EXAMPLE
172.16.0.2
255.255.255.0
Dynamic
No

Advertisement

Table of Contents
loading

Table of Contents