Ipx Static Route Setup - ZyXEL Communications Prestige 645R User Manual

FIELD
W/D This field is for the P645R on the server side. Your Prestige 645R
Spoofing(min) can spoof a response to a server's watchdog request after the
connection is dropped. In this field, type in the time (number of
minutes) that you want your Prestige 645R to spoof the watchdog
response.
SAP/RIP This field indicates the amount of time that you want your Prestige to
Timeout (min) maintain the SAP and RIP entries learned from this remote node in
its internal tables after the connection has been dropped. If this
information is retained, then your Prestige will not have to get the
SAP information when the line is brought back up. Enter the time
(number of minutes) in this field.
Dial - On - This field is necessary for your Prestige on the client side. When set
Query to Yes, any Get Service SAP or RIP broadcasts will trigger your
Prestige to make a call to that remote mode.
Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to menu
11.1. Then press [ENTER] at the message [Press ENTER to Confirm] to save your configuration,
press [ESC] to cancel.

6.4.2 IPX Static Route Setup

Similar to IP, IPX static routes tell the Prestige 645R how to reach servers beyond a remote node before a
connection to that remote node is established.
From menu 12, select 2 to bring up Menu 12.2 IPX Static Route Setup, then select one of the IPX Static
Routes to open Menu 12.2.1 - Edit IPX Static Route, as shown next.
IPX Configuration
Prestige P645 ADSL Internet Access Router
DESCRIPTION EXAMPLE
No
6-7