Changing The System Password; General Setup; Figure 2-8 Menu 23.1 - System Password - ZyXEL Communications Prestige 645R User Manual

# MENU TITLE
26 Schedule Setup
99 Exit
2.8

Changing the System Password

The first thing you should do is to change the default system password by following the steps below.
Step 1. Enter 23 in the main menu to open Menu 23 - System Password as shown next.
When the Menu 23 System Password appears, type your system password (1234 is the default when
shipped) and press [ENTER].
Step 2. Enter your new system password. You can use up to 30 alphanumeric characters. Do not use
spaces, but dashes "-" and underscores "_" are accepted. Then press [ENTER].
Step 3. Re-type your new system password for confirmation and press [ENTER].
Note that as you type a password, the screen displays a (*) for each character you type.
If you forget your password, use the reset button to restore the default password
of 1234. This will allow you to enter the SMT. Then use the above instructions to
2.9

General Setup

Menu 1 - General Setup contains administrative and system-related information.
To enter menu 1 and fill in the required information, follow these steps:
Step 1.
Enter 1 in the main menu to open Menu 1 – General Setup.
Step 2.
The Menu 1 - General Setup screen appears, as shown below. Fill in the required fields marked
[?] and turn on the individual protocols for your applications, as explained in the following table.
Hardware Installation & Setup
Use this menu to configure times for calls to remote nodes.
Use this to exit the SMT and return to a blank screen.
Menu 23 – System Password
Old Password= ****
New Password= ****
Retype to confirm= ****
Enter here to CONFIRM or ESC to CANCEL:

Figure 2-8 Menu 23.1 - System Password

set a new password.
Prestige 645 ADSL Internet Access Router
DESCRIPTION
2-9