Single User Account Configuration; Figure 3-9 Menu 4 - Internet Access Setup For Single User Account; Table 3-6 Single User Account Menu Fields - ZyXEL Communications Prestige 645R User Manual

Prestige P645 ADSL Internet Access Router
UDP and TCP packets can be routed. In addition, partial ICMP, including echo and traceroute, is
supported.

3.11.2 Single User Account Configuration

The steps for configuring your Prestige for Single User Account are identical to the conventional Internet
access with the exception that you need to fill in two extra fields in Menu 4 - Internet Access Setup, as
shown below.
SUA
Figure 3-9 Menu 4 – Internet Access Setup for Single User Account
To enable the SUA feature in menu 4, move the cursor to the Single User Account field and select Yes (or
No to disable SUA). Then follow the instructions on how to configure the SUA fields.
FIELD
Single User Account
IP Address Assignment
Press [ENTER] at the message [Press ENTER to Confirm ...] to save your configuration,
or press [ESC] at any time to cancel.
3-16
ISP's Name= 1
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 10
VCI #= 10
Service Name= N/A
My Login= N/A
My Password= N/A
Single User Account= Yes
IP Address Assignment= Static
IP Address= 192.168.1.100
ENET ENCAP Gateway= 192.168.1.1
Press ENTER to Confirm or ESC to Cancel:

Table 3-6 Single User Account Menu Fields

Use the [SPACE BAR] to select Yes to enable SUA or No to
disable it.
Use the [SPACE BAR] to select Static or Dynamic.
IP Address With Dynamic in the IP Address Assignment field, this field
will be N/A; otherwise, enter the static IP address here.
Menu 4 - Internet Access Setup
DESCRIPTION
Internet Access