Viewing Multiple Protocols On Station Detail Displays; Netware Devices List - Fluke Series II User Manual

Figure 2-7. Ping SNMP Results
From the Tool menu press
the Station Locator feature, which details switch
information. Read "Station Locator" in Chapter 6 for more
information.
ace208s.bmp
(Find Node) to activate
Autotest and Central Setup
Viewing Multiple Protocols on Station Detail
Displays
The Station Detail display tells you if the station is running
multiple protocols. If multiple protocols are discovered,
the protocol name on the Station Detail display is followed
by a number. For example, Figure 2-8 shows part of the
Station Detail information for a station running three
protocols. Press (Station) to cycle through the
protocols.
Figure 2-8. Station Running Multiple Protocols

NetWare Devices List

To see a NetWare file server list, run AutoTest then press
(NetWare Server) on the AutoTest display.
The NetWare File Server display (Figure 2-9) shows the
nearest server for each of the four Ethernet frame types
2
Introduction
ace209s.bmp
2-9