Ping Mode; Mac Or Ip Mode Sample Results - Fluke Series II User Manual

2
Figure 7-10. MAC or IP Mode Sample Results
1 Rate is the raw data rate, excluding the
Ethernet framing overhead (preamble and
inter-frame gap).
1
2 This gauge shows the Network Assistant's
Traffic Generator transmission rate.
3 This gauge shows the Ethernet Utilization for all
traffic in the current collision domain. It does not
include the minimum inter-frame gap.

Ping Mode

Traffic Generator's Ping mode allows you to rapidly
transmit ICMP Echo Request packet traffic to a specific
device or network. The target device can be on the other
side of one or more routers. The Network Assistant does
not wait for a response before transmitting the next ICMP
3
Echo Request. The ICMP Echo Request sets the don't
fragment bit in the IP header.
Using Traffic Generator in Ping mode can
generate enough traffic to stress or saturate
a 10 MB or 100 Mb Ethernet station. Take
care when using Traffic Generator in Ping
ace708f.eps
mode.
ITO – Internetwork Throughput Option
XCaution
7
Introduction
7-19