Fluke Series II User Manual page 20

Icon Meaning
Press to display IP routers, servers, stations and other devices detected on the network that are
TCP/IP
running TCP/IP (Figure 2-11). Pressing an icon on the TCP/IP Devices display generates a list
Devices
of devices of that type. For more information, read "TCP/IP Devices."
Press to display general information about the status of the Hub. This information includes
Hub
whether the link is active and its activity level. The following fields within the Hub popup window
indicate the Hub's status.
Capability
Speed
Duplex Mode
RX Level (receive pair)
Normal: Hub signal level is within specification.
Marginal: Hub signal level is not within specification. (The problem is either excessive
attenuation in the cable or a defective Hub port.)
Press to display cable length and fault information (when the Network Assistant is not connected
Cable
to an active device). The Network Assistant displays the length to the first fault it detects. For
more details, see "Cable Autotest" in Chapter 4.
Table 2-1. Device Icons (Cont.)
Operation
Link Pulse Status
Duplex
Polarity
Autotest and Central Setup
Introduction
2
2-5