Web Remote Control - Fluke Series II User Manual

Introduction
Web Remote Control is a OneTouch Series II Pro feature
that enables you to view and interact with the Network
Assistant attached to the network via a web browser.
Your web browser software must be "Java-enabled." If
you do not have a Pro model, you will only be able to
view the current screen with no interaction.
Enter the IP address of your Network Assistant in the web
browser's address area. To find out the IP address, run
Autotest then press (Network Assistant icon). The IP
address will be listed. Enter it in the address area and
press Enter. These options are available:
q
View the Current OneTouch Screen
q
SNMP Setup

Web Remote Control

q
Web Agent FAQ
q
OneTouch Series II News
View the Current Screen
Your web browser displays the Web Agent web page
(Figure C-1) with the current screen displayed and the
capability to interact with the screen via the web browser.
Appendix C
C-1