Adjusting The Display Contrast - Savin 3699 Key Operator Tools

Key Operator Tools
On Hook
G
Adjust the volume using the 0 or
1 keys and press [OK].
Note
When you press [Cancel], the
volume setting is canceled and
the display shown in E appears
again.
Lowest = OFF
H
9
Press [PrevMenu] twice.
I
Press [Exit] to return to the stand-
by mode.

Adjusting the Display Contrast

Follow these steps to adjust the con-
trast of the operation panel display.
Eight levels of contrast are available.
232
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "Display Con-
trast" with the number keys.