Monitor Volume - Savin 3699 Key Operator Tools

H
Press [Exit] to return to standby
mode.

Monitor Volume

You can change the volume of the fol-
lowing sounds the machine makes:
On Hook
Sounds made when the {On Hook
Dial} key has been pressed.
Transmission
Sounds made when the machine is
sending a message.
Reception
Sounds made when the machine is
receiving a message.
Dialling
Sounds made after pressing the
{Start} key while establishing a
connection with the other party.
Scroll Key
Sound made when an operation
panel key is pressed.
Alarm
Sound made when a cover is
opened etc.
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
The "Key Op. Tools" main menu
appears.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "Monitor Vol-
ume" with the number keys.
F
Select an item you want to adjust
pressing [ Prev.] and [ Next].
Note
On Hook, Transmission, Recep-
tion, Dialling, Scroll Key, and
Alarm are shown in that order.
System Settings
9
231