Deleting Transfer Boxes - Savin 3699 Key Operator Tools

Key Operator Tools
M
Press [OK].
N
Press [PrevMenu] three times.
O
Press [Exit] to return to the stand-
by mode.

Deleting Transfer Boxes

This section describes how to delete
Transfer Boxes.
Limitation
If the specified SUB Code is not
registered as a Transfer Box, or the
messages of the box are registered
you cannot delete it.
A
Make sure that the machine is in
standby mode.
9
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
300
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
D
Enter the code for "Box Settings"
with the number keys.
E
Enter the code for "Del. Transfer
Box" with the number keys.
Note
If the item require is not dis-
played, press [ Prev.] or [ Next]
until it is.
F
Enter the SUB code of the Trans-
fer Box you wish to delete.
Note
You can enter up to 20 charac-
ters which can be digits 0-9, "#",
"*" and spaces (the first charac-
ter cannot be a space).