Night Timer - Savin 3699 Key Operator Tools

Key Operator Tools
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "Economy TX"
with the number keys.
F
Enter the economy transmission
time with the number keys. To
change AM/PM, press [AM
(North America only). When the
setting is correct, press [OK ].
Note
If you press [Cancel] , the en-
tered time is canceled and the
display shown in E appears
again.
G
9
Press [PrevMenu] twice.
H
Press [Exit] to return to the stand-
by mode.

Night Timer

Use this feature to have the machine
turn it's heater on and off automati-
cally at the times that you prescribe.
For example, by having the heater
turned off during the evening, on hol-
idays or at other times when you are
absent, you can cut on power costs.
234
Note
You can program the timer to turn
on or off twice daily over a 1-week
cycle.
Incoming faxes are received to
memory (Substitute Reception)
when the heater is off and not
printed until the heater comes back
on.
To edit settings already stored for
this feature, follow the same proce-
dure for storing settings (the fol-
lowing procedure).
A
Make sure that the machine is in
standby mode.
PM]
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
The Key Op. Tools menu appears.