Changing The User Parameters - Savin 3699 Key Operator Tools

Key Operator Tools
Note
If you are programming both
timers for this day, then press
[ Next] to display the other tim-
er (e.g. "Set 2") and repeat this
procedure.
To set a timer for another day,
press [ Next] to display the tim-
er and adjust it as necessary.
L
Press [OK].

Changing the User Parameters

The User Parameters allow you to customize various settings to match your
needs.
Preparation
Access to some User Parameter Settings requires installation of optional
equipment or that other settings be made beforehand.
9
Switches and Bits
User Parameters are divided into switches, and each switch is divided into
eight bits. The right most bit is bit 0 and the left most is bit 7.
Switch 00
236
0 1 0
7 6 5
M
Press [OK].
N
Press [PrevMenu] twice.
O
Press [Exit] to return to standby
mode.
0 0 0
4 3 2
0 0
1 0