Fax Header Print - Savin 2018 Operating Instructions Manual

Kir-C2-ENcombine_F_FM.book Page 10 Friday, September 19, 2003 3:03 PM
Transmission Mode

Fax Header Print

In some cases, you may want the oth-
er party to receive an unmarked copy
1
of your original. To do this, switch
Fax Header off.
When the Fax Header is set to "On",
the stored name is printed on the re-
ceiver's paper.
Important
❒ In the USA, the Fax Header must
contain the telephone number of
the line your machine is connected
to. It will be printed on the header
of every page you send. Required
in the USA.
Note
❒ You can program a fax header
name using the Program Fax Infor-
mation function.
❒ You can select whether or not
dates, fax header names, file num-
bers, or page numbers are printed
by changing their respective User
Parameters. (switch 18, bit 3, 2, 1, 0)
See p.80 "User Parameters".
❒ You can program one of the User
Function keys with operations for
this function.
❒ In the USA, law requires that your
fax number be included in the Fax
Header. Program the fax number
and switch on Fax Header Print
with User Parameters. See, p.80
"User Parameters".
A A A A
Press [TX Mode].
10
B B B B
Select [Print Fax Header] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
C C C C
Select [On] using { { { { U U U U } } } } or { { { { T T T T } } } } , and
then press the { { { { OK} } } } key.
D D D D
Press the { { { { Cancel} } } } key.
The standby display appears.
Note
❒ To check the settings, press [TX
Mode].