Transmission Mode; Sending At A Specific Time (Send Later) - Savin 2018 Operating Instructions Manual

Kir-C2-ENcombine_F_FM.book Page 3 Friday, September 19, 2003 3:03 PM

Sending at a Specific Time (Send Later)

Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
v a n t a g e o f o f f - p e a k t e l e p h o n e
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later when you scan it. Faxes
will be queued in memory and sent
during Economy Transmission Time.
Important
❒ After
the
switched off for about one hour, all
fax messages stored in memory are
lost. If messages are lost for this
reason, a Power Failure Report is
automatically printed when the
main power switch is turned on.
Use this report to identify lost mes-
sages.
Limitation
❒ This function is unavailable with
Immediate Transmission. Use
Memory Transmission.

1. Transmission Mode

machine has been
Note
❒ You can specify a time within the
next 24 hour period.
❒ If the current time shown is not
correct, change it. See "Timer Set-
tings", General Settings Guide.
A A A A
Place the original, and then select
the scan settings you require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.29 "Scan Settings", Facsimile
Reference <Basic Features>
B B B B
Press [TX Mode].
C C C C
Select [Send Later] using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } } key.
3