Connecting The Machine To A Telephone Line And Telephone; Connecting The Telephone Line - Savin 2018 Operating Instructions Manual

Kir-C2-ENcombine_F_FM.book Page 106 Friday, September 19, 2003 3:03 PM
Appendix
Connecting the Machine to a Telephone
Line and Telephone

Connecting the Telephone Line

To connect the machine to a telephone line, use a snap-in modular type connector.
R CAUTION:
• To reduce the risk of fire, use only No. 26 AWG or larger telecommunica-
tion line cord.
R ATTENTION:
• Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de
télécommunications 26 AWG ou de section supérieure.
Important
❒ By law in the United States, you must program your phone number identifi-
cation (your fax number) into your machine before you can connect the public
phone system. See p.59 "Initial Settings and Adjustments", Facsimile Reference
<Basic Features>
❒ Make sure the connector is the correct type before you start.
❖ ❖ ❖ ❖ Where to connect the machine
9
1.
G3 interface unit connector
2.
External telephone connector
106
1
2