P4 Effsnd2: Send Settings For Effect 2; P5 Auxsend: External Send Settings; P6 Finaleff: Selection And Settings For The Final Effect - Korg D1600mkII Owner's Manual

P4 EffSnd2: Send settings for effect 2

Here you can set the send level from each mixer channel to
effect 2.
For details, refer to "P3 EffSnd1: Send settings for effect 1"
(→p.129).

P5 AuxSend: External send settings

Here you can set the send level from each mixer channel that
will be output to the [AUX OUT] jack.
For details on connecting and using an external effect, refer
to p.58.
1
1. SendLevelMeter.............. (SND A/CLP, –8, –18, –42dB)
This shows the output level to the [AUX OUT] jack. The
vertical axis shows the level.
2. Aux ......................................... [Ch1...16/000...100]
Set the send amount from each mixer channel to the
[AUX OUT] jack.
3. Pair ...........................................................................
Specify pairing for adjacent mixer channels. For details,
refer to "P1 Ch1–8: Select the inputs for mixer channels
1–8" "Pair" (→p.123).
130
3
2
P6 FinalEff: Selection and settings for
the final effect
The final effect is applied to the overall output from the
mixer, and is used mainly to adjust the overall balance. For
the location at which the final effect is inserted, refer to the
block diagram (→p.171).
1
2
1. OutputLevelMeter ......... (OUTL, R/CLP, –8, –18, –42dB)
This shows the output level of the effect.
The horizontal axis shows the effect output, and the
vertical axis shows the level.
2. EffectNumber .............[F000, F001...032, u033...064]
Select the desired effect program.
"u033"–"u064" is the user area, in which you can store
effect programs that you edited.
3. EffectProgramName ..................... (Effect Program List)
When you press this button, the "Effect Algorithm"
dialog box will appear. Here you can view the structure
of the program and its on/off status.
3a
3b
3a. EffectIcon .............................................................
3b. Effect On/Off......................................... [On, Off]
Refer to "EffectIcon" and "Effect On/Off" for the insert
effects (→p.127).
4. Bypass.......................................................................
Refer to "Bypass" for the insert effects (→p.127).
5. Rename .....................................................................
Here you can modify the name of the effect program.
Select the effect program whose name you wish to
modify, press the "Rename" button to access the dialog
box, and modify the name. A name of up to 16 characters
can be input. For details, refer to "2. Naming a song"
(→p.35).
After modifying the program name, use "Store" to
store it. The effect program name you modified will
be discarded unless you use "Store" to store it.
4
5
6
3