Msteff2: Select And Edit Master Effect 2; Effsnd1: Adjust Send Levels To Master Effect 1; Effsnd2: Adjust Send Levels To Master Effect 2; Auxsend: Adjust The External Send Levels - Korg D1200 Owner's Manual

6. Bypass .............................................................
( p.87: Insert effect "Bypass")
7. Rename ............................................................
Edits the name of the effect program.
Select the effect program whose name you want to edit,
press the "Rename" button to open the dialog box, and
edit the name. You can input a name of up to sixteen
characters. ( p.31)
After you edit the program name, use "Store" to save it.
The effect program name you edited will be discarded if
you fail to use "Store."
8. Store ................................................................
Saves the edited effect program in one of the master
effect user area memories "u001"–"u032."
In the "StoreEffect" dialog box, specify a "user area
number," and use the "Exec." button or the [YES/OK]
key to execute the Store operation. If you decide to can-
cel, press the [NO/CANCEL] key.
Effects are always overwritten.
MstEff2: Select and edit master effect
2
Select and make settings for master effect 2.
For an explanation of the parameters, refer to "MstEff1: Se-
lect and edit master effect 1."
The send level from each channel (i.e., the input level to
the effect) can be adjusted in the "EffSnd2" tab page.
EffSnd1: Adjust send levels to master
effect 1
Adjust the send level from each mixer channel to master ef-
fect 1.
1
1. SendLevelMeter...... (SND 1/CLP, –8, –18, –42dB)
Indicates the send level to master effect 1. The vertical
axis is the level.
2. Send............... [Ch1...6, 7–8...11–12/000...100]
Adjusts the send level from each mixer channel to mas-
ter effect 1.
3. Pair ..................................................................
Specifies pairing for adjacent mixer channels. ( p.38,
86)
90
3
2
EffSnd2: Adjust send levels to master
effect 2
Adjust the send level from each mixer channel to master ef-
fect 2.
For details, refer to "EffSnd1: Adjust send levels to master ef-
fect 1."
AuxSend: Adjust the external send
levels
Adjust the send level at which each mixer channel is output
from the [AUX OUT] jack.
For details on connecting and using an external effect, refer
to p.45.
1
1. SendLevelMeter..... (SND A/CLP, –8, –18, –42dB)
Indicates the send level to the [AUX OUT] jack.
The vertical axis is the level.
2. Aux ................[Ch1...6, 7–8...11–12/000...100]
Adjusts the send level from each mixer channel to the
[AUX OUT] jack.
3. Pair ..................................................................
Specifies pairing for adjacent mixer channels. ( p.38,
86)
3
2