Effect Parameter List; Insert Effect (2In2Outx2)/Master Effect/Final Effect; Reverb Rv1 - Rv7 - Korg D1600mkII Owner's Manual

Digital recording studio
Hide thumbs Also See for D1600mkII:
Table of Contents

Advertisement

Effect Parameter List

Example
Algorithm number: Category number: Algo-
rithm name
1: RV1: Reverb Hall
Parameter name shown on screen ..... Range of
parameter
(parameter name)
*Time (Reverb Time [sec])................... 01...10.0s Sets the reverberation
* Parameters marked by an "*" in front of the screen parameter
name can be controlled by an external device such as an
expression pedal. (→p.91 "Device")
Insert Effect (2in2outx2)/
Master Effect/Final Effect
These algorithms can be selected for an insert effect if
"2in2outx2" is selected for "SelectEffType". They can also be
selected for a master effect or a final effect.
When these effects are used as an insert effect or final effect,
they are stereo-in/stereo-out. However when these effects
are used as a master effect, they are mono-in/stereo out.
Reverb RV1 – RV7
Category: Reverb-type effects
1: RV1: Reverb Hall
This hall-type reverb simulates the reverberation of mid-size
concert halls or ensemble halls.
2: RV2: Smooth Hall
This hall-type reverb simulates the reverberation of larger halls
and stadiums, and creates a smooth release.
3: RV3: Reverb Wet Plate
This plate reverb simulates warm (dense) reverberation.
4: RV4: Reverb Dry Plate
This plate reverb simulates dry (light) reverberation.
Time (Reverb Time [sec])... 0.1...10.0 Sets the reverberation time
HiDamp (High Damp [%]) ...... 0...100 Sets the damping amount in the
PreDly (Pre Delay [msec])...... 0...200 Sets the delay time from the dry
Thru (Pre Delay Thru [%]) ...... 0...100 Sets the mix ratio of non-delay
EQTrim (EQ Trim)................... 0...100 Sets the EQ input level
LEQG (Pre LEQ Gain [dB]) –15...+15 Sets the gain of Low EQ
HEQG (Pre HEQ Gain [dB])–15...+15 Sets the gain of High EQ
Mix (Wet/Dry) ....Dry, 1:99...99:1, Wet Sets the balance between the
: Pre Delay [msec], : Pre Delay Thru [%]
The "Pre Delay" sets the delay time to the reverb input, allowing
you to control spaciousness.
Explanation
time
high range
sound
sound
effect and dry sounds
Using the "Pre Delay Thru" parameter, you can mix the dry sound
without delay, emphasizing the attack of the sound.
137

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents