Korg D1600mkII Owner's Manual page 103

When backing up to CD-R/RW
6a. Speed ..................................................................
You can specify the writing speed when backing up to
CD-R/RW.
Press the "Yes" button to begin the backup.
When backing up to the USB drive
6b. Date ....................................................................
Input the date and time. Press the "Date" button to open
the dialog box, and specify the timestamp (date and
time) for the file. Use the cursor to select the field you
want to change, and use the [VALUE] dial to edit the
date and time.
Press the "Yes" button to begin the backup.
You cannot save if an identically-named file already
exists on the USB drive. Either change the name, or
delete the existing file from the USB drive.
B-U/Rst Type: Restore
This operation restores backed-up song or effect user data
into the song drive of the hard disk.
• From "Backup1Song" data on the USB drive or CD, you
can restore that song and effect user data.
• From "BackupAllSong" data on a CD, you can restore one
specific song or all songs. Effect user data will also be
restored.
From the USB drive or a CD on which you performed
"BackupUserData," you can restore effect user data.
When restoring one song or all songs, you can choose
whether to restore effect user data.
3
2. Drive ............................................................ [S, C, U]
6a
3. Source
When restoring from a CD
6b
When restoring from the USB drive
2
5
4
Selects the restore-source drive.
Choose C:CD or U:USB DOS.
For more about the drive, refer to "B-U/Rst Type:
Backup 1 Song" (→p.93).
Selects the restore-source song or effect. You can press
the " " button and make your selection in a dialog box.
3a
3a. BackUpFileList ......................................................
Selects the file to restore.
If you turn the "SelectAll" button on, all songs will be
restored.
Press the "OK" button to confirm your selection, or press
the "Cancel" button to cancel.
3b
3b. BackUpFileList ......................................................
Selects the file to restore.
In the BackUpFileList screen, folders are shown as
[(folder name)].
To see the contents of a folder, select [(folder name)] and
press the "OK" button.
To go back up to the previous level, select "←" and press
the "OK" button.
Press the "OK" button to confirm your selection, or press
the "Cancel" button to cancel. You can delete a file or
folder by pressing the "Delete" button.
Long filenames are not supported.
You can't restore all data in a single operation.
95