Updating The System; Downloading The System File - Korg D1600mkII Owner's Manual

Macintosh users (Mac OS 9.0.4 or later)
1. Use a USB cable to connect your computer.
Connect the USB cable to the [USB] connector of the
D1600mkII. Make sure that the connector is oriented
correctly, and push it all the way in.
2. Access the "USB Mode" screen.
In the [SYSTEM/USB] "DiskUtil" tab page, press the
"USB Mode" button.
Do not disconnect the USB cable or turn off your
computer while this screen is displayed.
3. A drive named "KORG D1600" will appear on your
desktop.
When you connect the D1600mkII for the first
time, a device driver will be installed.
4. Back up the data on your computer.
Open "KORG D1600" that appeared in step 3, and
you will see the contents of the USB drive within the
D1600mkII's hard disk. Copy the desired data into
your computer. You can also copy data from your
computer into the USB drive.
5. Drag the added drive into the trash.
To disconnect the D1600mkII, drag the drive from
your desktop into the "trash," or select "Remove"
from the "Special" menu. In the "USB Mode" dialog
box, press the "Exit" button to exit the "USB Mode"
dialog box. Disconnect the USB cable from the
D1600mkII.
86

Updating the system

1. Downloading the system file
You can download the latest system file from the Korg
website (http://www.korg.com). For details, refer to the
Korg website.
Using a CD-ROM/R/RW
Insert the media containing the system file into the CD-
R/RW drive.
Using USB
Use a USB cable to connect the D1600mkII to your
computer, and copy the system file into the root level of
the USB drive (the same location as the KORG folder).
2. Updating the system
1. Load the system file.
In the "SelOperation" field of the [SYSTEM/USB]
"DiskUtil" tab page, choose "LoadSystem/C" if you
want to load from CD-ROM/R/RW, or
"LoadSystem/U" if you want to load from the USB
drive.
SelOperation
2. Execute loading.
Press the "Exec." button.
The display will ask "AreYouSure?" Press the "Yes"
button to begin loading.
If the power is turned off while the system is
being loaded, the D1600mkII may stop operating
correctly. If this occurs, please contact your Korg
distributor.
3. When loading is completed, the D1600mkII will
check whether the system file was loaded correctly.
If the file was loaded correctly, the display will
indicate "Check sum = OK." If not, the display will
indicate "Check sum = NG."
If the display indicates "Check sum = NG," restart
the D1600mkII and load the system file once again.
If the "Check sum = NG" message appears again, it is
possible that the D1600mkII has malfunctioned.
Please contact your Korg distributor.