Korg D1600mkII Owner's Manual page 156

36: LS5: Early Reflections L
This early reflection effect has more precise early reflections with
twice the maximum length of a normal-size effect. You can create a
very smooth and dense sound.
Type (Type) ................. Sharp, Loose,
Modula, Revers
Time (ER Time [msec]).......10...1600 Sets the time length of early
PreDly (Pre Delay [msec]) ......0...200 Sets the time taken from the orig-
EQTrim (EQ Trim) ...................0...100 Sets the input level of EQ applied
LEQG (Pre LEQ Gain [dB]) .............–
15.0...+15.0
HEQG (Pre HEQ Gain [dB]) ............–
15.0...+15.0
Mix (Wet/Dry).... Dry, 1:99...99:1, Wet Sets the balance between the
37: LS6: Rotary Speaker
This effect simulates a rotary speaker, and obtains a more realis-
tic sound by simulating the rotor in the low range and the horn
in the high range separately. The effect also simulates the stereo
microphone settings.
ODSW (OverDrive SW) ......... Off, On Overdrive on/off
DGain (OverDrive Gain) .........0...100 Degree of distortion
DLevel (OverDrive Level)........0...100 Output level of overdrive
DTone (OverDrive Tone) ...........0...15 Tone of overdrive
SPsim (Speaker Simulator) ... Off, On Speaker simulation on/off
Mode (Mode Switch)......Rotate, Stop Switches between speaker rota-
Speed (Speed Switch)...... Slow, Fast Switches the speaker rotation
RotAcc (Rotor Acceleration) ...0...100 Determines how quickly the rotor
Rotor (Rotor Ratio) . Stop, 0.50...2.00 Adjusts the (low-range side) rotor
HrnAcc (Horn Acceleration)....0...100 How quickly the horn rotation
Horn (Horn Ratio) ... Stop, 0.50...2.00 Adjusts the (high-range side)
HRBal (Horn/Rotor Balance) ... Rotor,
MicDst (Mic Distance).............0...100 Sets the distance between the
Spread (Mic Spread) ..............0...100 Sets the angle of left and right
Mix (Wet/Dry).... Dry, 1:99...99:1, Wet Sets the balance between the
: Horn Acceleration, : Rotor Acceleration
On a real rotary speaker, the rotation speed is accelerated or deceler-
ated gradually after you switch the speed. The "Horn Acceleration"
parameter sets the speed at which the rotation is accelerated or
decelerated.
: Mic Distance, : Mic Spread
This is a simulation of stereo microphone settings.
38: LS7: Center Canceller
When a stereo music source is input to this effect, parts that are
panned to the center (such as vocals and lead guitar) will be
erased. In addition, you can control the pitch.
Pitch (Pitch) ................. –12...0...+12 Sets the amount of pitch shift in
148
Selects the decay curve for the
early reflection
reflection
inal sound to the first early reflec-
tion
to the effect sound
Sets the gain of Low EQ
Sets the gain of High EQ
effect and dry sounds
tion and stop
speed between slow and fast
rotation speed in the low range is
switched
rotation speed. Standard value is
1.00. Selecting "Stop" will stop
the rotation
speed in the high range is
switched
horn rotation speed. Standard
value is 1.00. Selecting "Stop" will
stop the rotation
Sets the level balance between
1...99, Horn the high-range horn and low-
range rotor
microphone and rotary speaker
microphones
effect and dry sounds
steps of a semitone
Adjust (Adjust) .........L50...CNT...R50 Sets the cancelling position
Himix (Center Hi mix)............. 0...100 Sets the mixing amount of the
Lomix (Center Lo mix) ........... 0...100 Sets the mixing amount of the
high-frequency portion of the
center position
low-frequency portion of the cen-
ter position