Copying The Settings For The Pads - Korg MPS-10 Owner's Manual

MPS-10
- Editing the KITs
Once the pad for which you want to switch INSTs is confirmed, use the VALUE knob to select "INST"
and press the ENTER button. An INST selection screen appears like the one shown here.
The category (Category Name), INST name, one-shot/repeat (square: magenta; circle: cyan) and
BPM data are shown on the INST (instrument) selection page. Turn the VALUE knob to select an
INST, and press the ENTER button. The INST is selected, and the display returns to the previous
page.
Press the EXIT button to cancel and return to the previous page.
7
Now the INST that's assigned to the pad has been changed. Strike the pad to confirm.
Switching between categories
The only INSTs listed on this page are those in the currently selected category.
Press the EDIT button to switch between categories.
This shows the category selection sub-window. Turn the VALUE knob to select a new category, and
press the ENTER button.
To close the sub-window without changing the category, press the EXIT button.
Once you change the category, the INST for the new category is shown.

Copying the settings for the pads

You can copy the settings from each pad to other pads, or to pads in other KITs.
When you press the EDIT button while in PAD EDIT, a pop-up menu appears where you can choose
whether to copy or paste the selected pad.
22