Installing The Card - Kodak XLS 8400 PS User Manual

Customizing Your Printer
B–10

Installing the Card

The steps below describe how to insert and seat the SIMM.
1. Locate the SIMM receptacles on the left side of the drawer.
2. Hold the SIMM at a 45_ angle and position the bottom of the SIMM in
the first empty receptacle adjacent to the other installed cards.
3. Gently tilt the SIMM back so that it is upright and snaps into place in
the clips on each side of the receptacle.
card
clip
Part No. 4B1709 March 1995