Kodak XLS 8400 PS User Manual page 25

Getting Started
LocalTalk Cable
When connecting the printer directly to a computer using LocalTalk cable,
you will need two LocalTalk connectors and a LocalTalk cable to run
between them.
Follow these steps to connect the computer directly to the printer using
LocalTalk cable:
1. Make sure that the host computer is turned on.
2. Make sure that the printer is turned off.
3. Attach one of the LocalTalk connectors to the computer's
LocalTalk port.
4. Attach the other LocalTalk connector to the printer's LocalTalk port.
LocalTalk port
5. Attach a LocalTalk cable between the two connectors.
6. Turn the printer on.
NOTE: The printer will not initialize if the host computer is not running.
Part No. 4B1709 March 1995 1–11