Kodak XLS 8400 PS User Manual page 38

Getting Started
1–24
D
Lift and move the media-length stop to the appropriate position for
the paper you are loading.
A label on the bottom of the tray shows the available settings.
NOTE: You cannot change the media length stop on the 9.5I x 14I tray.
4. Remove and discard any blue stiffener sheets that remain in the
paper tray.
5. Remove the paper from the package.
NOTE: Handle the paper stack by the edges to avoid fingerprints on the
top page.
6. Remove the blue stiffener sheet from the logo-printed side of the
paper stack.
Leave the other blue stiffener sheet on the bottom of the stack.
7. Place the paper in the tray with the logo side facing up.
label
Part No. 4B1709 March 1995