Correcting Problems
4–6
Symptom
Printer does not print when job is
sent from the host.
Streaks, lines, or spots appear
on prints.
Possible solution(s)
D
Wait to see if the job is still
processing.
D
Try printing a file that has
printed previously.
D
Verify all export module or
printer driver settings.
D
Check communications settings
for compatibility between printer
and host.
D
Follow instructions for "Printer
does not initialize."
D
Disconnect the communications
cable from the back of the
printer and try a test print.
If this does not work, service
is required.
D
Check to see that the paper or
transparency material in the tray
is clean and free of streaks.
D
Check to see that the ribbon
is clean.
D
Clean the thermal head per the
instructions in Getting Started.
If streaks persist, use the
alternate procedure described
in this chapter.
Part No. 4B1709 March 1995