Adding More Memory; Setting Up For The Installation - Kodak XLS 8400 PS User Manual

Part No. 4B1709 March 1995

Adding More Memory

You can purchase SIMMs and install them in your printer to increase
memory to either 48 MB or 64 MB. Installing the SIMMs may increase
the speed at which documents are processed before they are printed,
and allows more fonts to be downloaded with jobs.
Installing extra memory is also useful because it allows simultaneous
processing and printing of more and/or larger jobs. In other words, it
increases the possible number of prints per hour. For example, increasing
the printer's memory to 64 MB while running in raster mode allows you to
print one 9 1/2I x 14I job and process a second job of the same size.
Without that much memory in the printer, only smaller jobs can be
processed and printed.
The SIMMs should be 16 MB (in 4MB X 32 bit configuration), 72-pin,
symmetrical, 70 nanosecond SIMMs. The following cards fit these
specifications:
D
Mitsubishi—Part No. MH4M32BNXJ–7
D
Toshiba—Part No. THM324000s–70
D
Motorola—Part No. MCM32400s70
Follow the steps below to install additional memory in the printer.

Setting up for the Installation

The steps below describe how to prepare to install a SIMM.
1. Turn the printer off and unplug it.
Customizing Your Printer
B–5