Kodak XLS 8400 PS User Manual page 20

Getting Started
slot for optional
Network
Interface Card
LocalTalk port
Parallel port
1–6
Printer Back View
The back of the printer is shown below.
Power cord inlet—one of four standard power cords is included with
your printer. The standard types are for North America/Japan, UK,
Europe Continental, and Australia. If you will be using the printer outside
of these areas, you may need to purchase a power cord.
Ports—a variety of ports is provided on the back of your printer. Ethernet
ports will be in place if the optional Network Interface Card is installed.
Parallel (Centronics) port
LocalTalk port
SCSI ports—these ports are active for external SCSI font disk drive
connections. A 50-pin submini SCSI terminator is included in the
printer package.
Ethernet 10BaseT and 10Base2 ports—these ports appear only when
the Network interface card is installed.
For more information about connecting the printer, refer to the "Attaching
the Interface Cable" section of this chapter.
SCSI ports
power cord inlet
Part No. 4B1709 March 1995