Copying Onto Tab Stock - Ricoh IS 2060 Operating Instructions Manual

Copying onto Tab Stock

You can copy onto tab stock.
Preparation
Before using this function, set the
tray for tab stock and set the posi-
tion of the index tab. ⇒ "Paper
Type" in the General Settings
Guide
Important
❒ When you set the tab stock, be sure
to use the optional tab sheet fence.
❒ Set the tab stock so that it will be
fed from the side without a tab
first.
❒ Adjust the back fence position so
that the tab sheet fence will fit the
tab stock.
Note
❒ Check the position of the index tab
to avoid cropping the image.
❒ Set the tab stock with the side to be
copied down.
❒ Tab stock is always fed starting
with the top tab.
1
1.
Originals
2.
Tab stock
3.
Copies
A A A A
Select the paper tray where the
tab sock is set.
B B B B
Place the originals, and then press
{ { { { Start } } } } key.
the
Basic Procedure
3
2
19
2