Table of Contents
Advertisement
Placing Originals
1
1.
Sensors
A A A A
Set the document guide to the
original size.
B B B B
Align the edges of the original
and place it on the document
feeder (ADF) with the side to be
copied facing up.
1. Limit mark
2. Document guide
Note
❒ Straighten curls in the original
before placing it on the docu-
ment feeder (ADF).
❒ To prevent multiple sheets from
being fed at once, fan the origi-
nal before placing it on the doc-
ument feeder (ADF).
❒ Set the original squarely.
12
Batch mode
In the batch mode, the machine cop-
ies an original including more than
100 pages as one document, even if it
is placed on the document feeder in
parts.
Important
❒ When placing special originals
such as translucent paper, place
them one by one.
A A A A
Press the [Special Original] key.
B B B B
Select the [Batch] key, and then
press the [OK] key.
Note
❒ When [Batch] is not displayed,
change the settings in ⇒ p.107
"Switch to Batch (SADF)".
C C C C
Place the first part of the original,
{ { { { Start } } } } key.
then press the
D D D D
After the first part of the original
has been fed, place the next part
and then press the
Note
❒ If you want to copy the subse-
quent originals in this mode, re-
D .
peat step
E E E E
When the Sort, Combine or 1 Sid-
ed → → → → 2 Sided mode has been set,
{ { { { # } } } } key after all origi-
press the
nals have been scanned.
{ { { { Start } } } } key.
Advertisement
Table of Contents
