Table of Contents
Advertisement
11.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). ⇒"Turning On the
Power" in the General Settings Guide.
12.
Clip Tray
Put clips and staples removed.
13.
{ { { {
} } } }
Sample Copy
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image qual-
ity settings before you make multiple
copies, you can save time and paper. ⇒
p.39 "Sample Copy"
{ { { {
} } } }
14.
Start
key
Press to start copying. Press to start scan-
ning and printing in Document Server
mode.
Common Key Operations
The following keys are common to all screens.
[Exit]
[Cancel]
[OK]
[LPrev.] [MNext]
key
Returns to the previous screen.
Deletes a selected function or entered values, and then returns
to the previous screen.
Acknowledges a selected function or entered values, and then
returns to the previous screen.
Moves to the previous or the next page when all the functions
cannot be displayed on one page.
15.
{ { { {
} } } }
Clear/Stop
key
• Clear
Press to delete a number entered.
• Stop
Press to stop a copy job in progress.
Press to stop Scanning and printing in
Document Server mode.
16.
{ { { {
} } } }
#
key
Press to enter a value.
17.
Number keys
Use to enter the desired number of cop-
ies, and data for selected modes.
18.
Function keys
These keys switch display to the operat-
ing screen of each functions. Follow the
instructions displayed by switching be-
tween screen with the function keys.
19.
Function Status indicator
These show the status of the above func-
tions:
• Green: the function is active.
• Red: the function has been interrupt-
ed.
v
Advertisement
Table of Contents
