Table of Contents
Advertisement
• Pale
Adjust the quality level for the
finish of a pale original with
normal density.
• Generation Copy
Adjust the quality level so as
not to thicken the lines of the
finish image.
❖ ❖ ❖ ❖ Image Density
You can select one of seven origi-
nal image density levels for each of
the original types (Text, Text/Pho-
to, Photo, Pale, Generation Copy).
General Features
❖ ❖ ❖ ❖ Duplex Mode Priority
You can select the type of Duplex
function effective when the ma-
chine is turned on or reset, or
modes are cleared.
❖ ❖ ❖ ❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
❖ ❖ ❖ ❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
❖ ❖ ❖ ❖ Change Initial Mode
You can select the initial mode or
Program No. 10 as the mode effec-
tive when the machine is turned on
or reset, or modes are cleared.
❖ ❖ ❖ ❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 999.
❖ ❖ ❖ ❖ Tone: Original remains
The beeper (key tone) sounds
when you forgot to remove origi-
nals after copying.
Accessing the User Tools (Copy/Document Server Features)
2
/
5
Note
❒ If the "Panel Tone" of the User
Tools (System Settings) setting
is "Off", the beeper does not
sound irrespective of the "Tone:
O r i g i n a l re m a i n s " s e t t i n g .
⇒"Panel Tone" in the General
Settings Guide
❖ ❖ ❖ ❖ Job End Call
You can choose whether or not the
beeper sounds when copying is
complete.
Note
❒ If the "Panel Tone" of the User
Tools (System Settings) settings
is "On", the machine beeps to
notify you that the machine did
not complete a job for reasons
such as copying was interrupt-
ed, the paper tray ran out of pa-
per or a paper jam occurred.
General Features
❖ ❖ ❖ ❖ Copy Function Key: F1–F5
You can register frequently used
functions in function keys F1 to F5.
You can also change the registered
functions.
3
/
5
101
5
Advertisement
Table of Contents
