Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Is Displayed - Ricoh IS 2060 Operating Instructions Manual

Infotec copy reference
Table of Contents

Advertisement

If Your Machine Does Not Operate as You
Want

When a Message is Displayed

The following chart contains explanations for the common messages. If other
messages appear, follow the instructions as they are displayed.
Messege
Cannot detect original size. The size of the originals
Check original orientation. There is no copy paper that
Check paper size.
Rotate Sort is not available
with this paper size.
It is over stapling capacity. The number of sheets per set
Cannot staple paper of this
size.
Duplex is not avilable with
this paper size.
Maximum number of sets
is *.
Cannot copy. Original is
being scanned by other
functions.

4. Troubleshooting

Cause
placed is difficult to detect.
⇒ p.7 "Sizes difficult to de-
tect"
Original is not placed.
is in the same direction as
the originals.
Improper paper size is set.
A size of paper for which
Rotate Sort is not available
is selected.
is over the staple capacity.
The Staple function cannot
be used with paper size se-
lected.
A paper size not available
in Duplex mode has been
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
The Document Server func-
tion is in use.
Action
Place the original on the exposure
glass. ⇒ p.11 "Placing Originals on
the Exposure Glass"
If the original size is difficult to de-
tect, select the paper size manually.
Do not use Auto Reduce/Enlarge mode.
Place your originals.
Place the original in the same direc-
tion as the copy paper.
{ { { { Start } } } } key, copy
If you press the
will start onto the selected paper.
Select the proper paper size. ⇒ p.32
"Sort"
Check the stapler capacity. ⇒ p.35
"Staple"
Select a paper size that can be used
in Staple mode. ⇒ p.35 "Staple"
Select the proper paper size.
You can change the maximum copy
quantity. ⇒ p.101 "Max. Copy
Quantity"
To cancel the job in process, press the
[Exit] key, and then press the
} } } } key. Next, press the
ment Server
{ { { { Clear/Stop } } } } key. When the message
" [Stop] key was pressed. Stop stor-
ing?" appears, press the [Stop] key.
{ { { { Docu-
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

Is 2075Aficio 1060Aficio 1075

Table of Contents