Ricoh IS 2060 Operating Instructions Manual page 33

B B B B
Insert the copy paper with the
side you want to copy facing up
until you hear the beep, and align
the paper guide to the paper size.
1: Extender
Note
❒ If the guides are not flush with
the copy paper, images might
be skewed or paper misfeed
might occur.
❒ Do not stack paper over the lim-
i t m a r k , o t h er w i s e i m a g es
might be skewed or paper mis-
feed might occur.
❒ Swing out the extender to sup-
port paper sizes larger than
" × 11"
1
L , 8
A4 /
2
❒ Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
C C C C
Select the type and size of the pa-
per.
When copying onto standard size
paper
A Press the { { { { # } } } } key.
B Press the [Select Size] key.
C Select the paper size.
D Press the [OK] key.
L .
Copying from the Bypass Tray
When copying onto custom size
paper
A Press the { { { { # } } } } key.
B Press the [Custom Size] key.
C Press the [Vertical mm] key, en-
ter the vertical size of the paper
with the number keys, and
then press the [#] key.
D Enter the horizontal size of the
paper with the number keys,
and then press the [#] key.
Note
❒ If the [Horiz mm] key is not
highlighted, press the [Horiz
mm] key.
❒ To register the custom size
entered, press the [Program]
key and then press the [Exit]
key.
E Press the [OK] key.
When copying onto special paper
A Press the { { { { # } } } } key.
B Select paper type in "Special
paper".
C Press the [OK] key.
D D D D
Place your originals, and then
{ { { { Start } } } } key.
press the
E E E E
When your copy job is finished,
{ { { { Clear Modes } } } } key to
press the
clear the settings.
2
21