Queue-Set - Cisco Catalyst 3120 Command Reference Manual

queue-set

queue-set
Use the queue-set interface configuration command on the switch stack or on a standalone switch to map
a port to a queue-set. Use the no form of this command to return to the default setting.
Syntax Description
qset-id
Defaults The queue-set ID is 1.
Command Modes
Interface configuration
Command History Release
12.2(40)EX
Examples
This example shows how to map a port to queue-set 2:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# queue-set 2
You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged
EXEC command.
Related Commands Command
mls qos queue-set output buffers
mls qos queue-set output threshold
show mls qos interface
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-352
queue-set qset-id
no queue-set qset-id
ID of the queue-set. Each port belongs to a queue-set, which defines all the
characteristics of the four egress queues per port. The range is 1 to 2.
Modification
This command was introduced.
buffers
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Description
Allocates buffers to a queue-set.
Configures the weighted tail-drop (WTD) thresholds,
guarantees the availability of buffers, and configures the
maximum memory allocation to a queue-set.
Displays quality of service (QoS) information.
OL-12248-01