Show Etherchannel - Cisco Catalyst 3120 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

show etherchannel

Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
Syntax Description channel-group-number
detail
load-balance
port
port-channel
protocol
summary
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(40)EX
Usage Guidelines If you do not specify a channel-group, all channel groups are displayed.
In the output, the Passive port list field is displayed only for Layer 3 port channels. This field means that
the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the
only port channel in the channel group).
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
OL-12248-01
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
(Optional) Number of the channel group. The range is 1 to 48.
Display detailed EtherChannel information.
Display the load-balance or frame-distribution scheme among ports in the
port channel.
Display EtherChannel port information.
Display port-channel information.
Display the protocol that is being used in the EtherChannel.
Display a one-line summary per channel-group.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
show etherchannel
2-437