Boot Auto-Download-Sw - Cisco Catalyst 3120 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

boot auto-download-sw

Use the boot auto-download-sw global configuration command on the switch stack to specify a URL
pathname to use for the automatic software upgrades. Use the no form of this command to remove the
software image.
Syntax Description
source-url
Defaults
Disabled.
Command Modes
Global configuration
Command History Release
12.2(40)EX
OL-12248-01
boot auto-download-sw source-url
no boot auto-download-sw
The source URLs for the software images. The image-name.tar is the
software image to download and install on the switch.
These options are supported:
•
•
•
•
•
•
•
Modification
This command was introduced.
Local flash file system syntax on the standalone switch or the stack
master:
flash:
Local flash file system syntax on a stack member:
flash member number:
The member number can be from 1 to 9.
FTP syntax:
ftp:[[//username[:password]@location]/directory]/image-name.tar
HTTP server syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Remote Copy Protocol (RCP) syntax:
rcp:[[//username@location]/directory]/image-name.tar
Secure Copy Protocol (SCP) syntax:
scp:[[//username@location]/directory]/image-name.tar
TFTP syntax:
tftp:[[//location]/directory]/image-name.tar
Cisco Catalyst Blade Switch 3120 for HP Command Reference
boot auto-download-sw
2-27