Cisco Catalyst 3120 Command Reference Manual page 374

Catalyst blade switch 3120 for hp command reference

Hide thumbs Also See for Catalyst 3120:

Table of Contents

priority-queue

This example shows how to disable the egress expedite queue after the SRR shaped and shared weights

are configured. The shaped mode overrides the shared mode.

Switch(config)# interface gigabitethernet1/0/2

Switch(config-if)# srr-queue bandwidth shape 25 0 0 0

Switch(config-if)# srr-queue bandwidth share 30 20 25 25

Switch(config-if)# no priority-queue out

You can verify your settings by entering the show mls qos interface interface-id queueing or the show

running-config privileged EXEC command.

Related Commands

show mls qos interface

srr-queue bandwidth shape

srr-queue bandwidth share

Cisco Catalyst Blade Switch 3120 for HP Command Reference

Displays the queueing strategy (SRR, priority queueing), the

weights corresponding to the queues, and the

CoS-to-egress-queue map.

Assigns the shaped weights and enables bandwidth shaping on

the four egress queues mapped to a port.

Assigns the shared weights and enables bandwidth sharing on

the four egress queues mapped to a port.

Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands