Ip Ssh - Cisco Catalyst 3120 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

ip ssh

Use the ip ssh global configuration command on the switch stack or on a standalone switch to configure
the switch to run Secure Shell (SSH) Version 1 or SSH Version 2. This command is available only when
your switch is running the cryptographic (encrypted) software image. Use the no form of this command
to return to the default setting.
Syntax Description
1
2
Defaults The default version is the latest SSH version supported by the SSH client.
Command Modes
Global configuration
Command History Release
12.2(40)EX
Usage Guidelines
If you do not enter this command or if you do not specify a keyword, the SSH server selects the latest
SSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2,
the SSH server selects SSHv2.
The switch supports an SSHv1 or an SSHv2 server. It also supports an SSHv1 client. For more
information about the SSH server and the SSH client, see the software configuration guide for this
release.
A Rivest, Shamir, and Adelman (RSA) key pair generated by an SSHv1 server can be used by an SSHv2
server and the reverse.
Examples
This example shows how to configure the switch to run SSHv2:
Switch(config)# ip ssh version 2
You can verify your settings by entering the show ip ssh or show ssh privileged EXEC command.
OL-12248-01
ip ssh version [1 | 2]
no ip ssh version [1 | 2]
(Optional) Configure the switch to run SSH Version 1 (SSHv1).
(Optional) Configure the switch to run SSH Version 2 (SSHv2).
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
ip ssh
2-203