Regency LIBERTY L676E-LP Owners & Installation Manual page 29

5) Install the back brick panel by carefully placing it against the back
wall of the fi rebox.
Back Brick Panel
6) Place the top brick panel into position and hold it in place while slid-
ing the right side brick panel into position and secure using the brick
panel clip that was removed in step 3.
Top Brick Panel
Top Brick Panel
Regency ® L676E Direct Vent Gas Fireplace
Right Side
Brick Panel
Brick
Panel
Clip
7) Slide the left side brick panel into position and secure in place with
the brick panel clip that was removed in step 3.
L e f t
Side
Brick
Panel
Exterior Brick Panel Installation:
1) Ensure installation of the logs and glass door has been completed
before installing the exterior brick panels.
2) Line up the pins in the exterior base brick panel with the holes on
the outerbox of the fi rebox and fi t in place.
Outerbox of Firebox
3) Install the right side exterior brick panel by placing the bottom tab
into the slot of the exterior base brick panel.
The top of the brick panel is held in place by a magnet that sits
against the bracket as shown in the image below.
Repeat for left side exterior brick panel.
Base Brick Panel Slot
INSTALLATION
Bracket
Tab
29