27, Attach the CurU Pad (26) to the CurU Post (12) with
27
two M6 x 16mm Screws (108),
26
/
/
108
28. Make sure that aH parts have been properUy tightened, The use of the remaining parts wHU be expUained in
ADJUSTMENTS,
beginning on the next page.
Before using the resistance
system, turn on the console
and change the resistance
setting as
described
in CONSOLE OPERATION on page 21. Additional
resistance
may be purchased
by calting
totFfree 1-577-992-5999
and asking for a model number
WEMC5874.
An optional
WELDER CALF RAISE BLOCK may be purchased
for use with your resistance
system
by calling totFfree 1-877-992-5999
and asking for model number
WEMC5474.
16