Weider Platinum Plus 831.15407.0 User Manual page 14

21. Attach the Leg Lever (13) to the Front Leg (4) 21
with a Leg Lever Pin (91) and a Cotter Pin (90).
22. See the inset drawing. Route the short end of
the Split Cable (72) through the Front Leg (4) and
attach it inside the Leg Lever (13) with a Leg
Lever Pin (91) and a Cotter Pin (90).
Attach a 90mm Pulley (92) inside the Front Leg
(4), over the Spit CaMe (72), with an MIO x
92mm BoUt(116), two M10 Washers (129), two
25mm Spacers (130), and an MIO NyUonLocknut
(112).
23. Unsertthe two Short Pad Tubes (32) into the Leg
Lever (13). SHde two Large Foam Pads (37) onto
each Short Pad Tube.
Repeat this step with the Long Pad Tube (153)
and the Front Leg (4).
22
23
9O
J
112
_ 130
129
4
153
\
14